Mossberg® Tactical Accessories
Havlin Sales & Service is pleased to offer a line of both factory and quality after-market accessories for the tactical, law enforcement and home defense line.
All items are new
unless otherwise specified. Also check our section on
REMINGTON® 870™ ACCESSORIES
NEW! Limited Quantity Vintage 1991 Mossberg 500/590 Military/LE Factory Armorer’s Manual $19.99
MODEL 500/590/835
Closeouts from UTG – Ultimate Tactical Gear
Flashlights, Lasers, Mounting Systems
and Scopes
|
Item MNT-BR003XL $22.50 Solid Aluminum Construction with Matte Black Finish |
|
Clever 3 Piece Design for Clamping Shotgun/Paintball Barrel and Flashlight Tube |
|
Length: 1.6" (3 slots each side) |
|
Compatible Firearm Barrel Range: Diameter.75"-1.1" |
|
Flashlight Clamping Range: Diameter.75"-1.0" |
|
Item MNT-BR003XLS $9 Solid Aluminum Construction with Matte Black Finish |
|
Smart 2 Piece Design for Clamping Shotgun/Paintball Barrel |
|
Length: 1.6" (3 slots) |
|
Compatible Firearm Barrel Range: Diameter.75"-1.1" |
|
Item SCP-LS268 $39 UTG Tactical Red Laser Sight |
|
TS Rated Laser with Precise and Wide Range Windage and Elevation Adjustments |
|
Ambidextrous Push-button Pressure Switch and Batteries |
|
Complete with Weaver/Picatinny Ring |
|
Item SCP-RD40RGW-A $39
4" Tactical Red/Green Dot Sight, 38 mm tube, 4MOA Target Dot |
M500R PICATINNY RAIL
Easy to install – four mounting screws included
Introducing the latest entry in the Mil-Spec series of mounts, parts and sighting systems, manufactured to Mil-Spec 1913 requirements. The M500R will mount a variety of tactical accessories and scopes to your Mossberg® 500/590 or 835 pump shotgun receiver. Also adaptable to the new 930 and 935 autoloaders if drilled and tapped (separate front screws provided). Mfg by Havlin Sales.
M500R-8
8 x 40 TPI for receivers 1997 and newer $32
M930R-8 w/ special front screws for 930/935
$32
Actual length 5 inches. Rugged anodized high quality finish. Made in USA.
M500R8 shown on Mossberg 590A1
Scope not included.
M500/590/835 TACTICAL STOCKS AND ACCESSORIES
Ambidextrous Tactical
Shotshell holder attaches to stock with pre-drilled holes. All hardware
included. Lifetime warranty. Made in USA.
Item: TSSH4100 $18
*Synthetic forends on new Mossberg 500A cannot be replaced because action bars are attached to the forend.
Tactical Shotgun Forend
Item:
TSG0300 $55
Constructed of Military Grade DuPont® Extreme Temperature Glass Reinforced
Polymer
Rail locations at 90˚ Increments Around Forend
Picatinny Rails Allow for Easy Installation of All Your Favorite Accessories
Very Tough, Yet Extremely Lightweight
Tactical Shotgun Picatinny Rail Package
One Left 2" Picatinny Rail
One Right 2" Picatinny Rail
One 2" Bottom Picatinny Rail
Three Blank Inserts for When Rails are Not in Use.
Every Forend
Package includes an adapter kit which allows installation to:
Mossberg 500*/535/590/835, 12 Gauge
Remington 870, 12 Gauge
Winchester 1200/1300, 12 Gauge
*Synthetic forends on new Mossberg
500A cannot be replaced because action bars are attached to the forend.
M500 SPEED-FEED® STOCK
Synthetic Speed-Feed® stock, 12 ga Black or Woodland Camo, holds 2 extra shells
in each side of stock. Fits all Mossberg 500/590/835 12 ga pump shotguns, and
Maverick®88. Made in USA.
Item: SPDFD BLK $60
Item: SPDFD CAMO $60
M500 TACTICAL
RIBBED FOREARM
Mossberg® factory synthetic forearm, black, tactical ribbed design, for M590 and
older M500 long action slide assembly (pre-serial K850xxx). 12 ga only. Made in
USA
Item: SYNFRMRIB $22
ITEM: COMBOSYNSPDFD $75 (with black Speed Feed stock )
M500 CRUISER PISTOL GRIP
Mossberg factory synthetic black pistol grip kit, fits pump Mossberg® 500/590
and 835 pump shotgun, plus Maverick® 88. Hardware included. Fits 12/20 gauge
shotguns. Made in USA.
Item: 500PG $27
M500/590 HEAT
SHIELD
Mossberg® factory heat shield kit with all mounting hardware. Parkerized or blue
finish. Made in USA.
Item: HSPARK $34 (parkerized standard diameter)
Item: HSBLUE $27 (blue standard diameter) Out of Stock, no ETA
| How To Order | Talk To Us |